Our moonwalks are top quality inflatable structures. Our inflatables are compliant with ASTM standards and certified in the states of PA and NJ. Listed below are some of the many details that are standard on our inflatable moon bounces and slides:
18 oz textured non-skid flame-retardant vinyl |
Heavy synthetic nylon thread |
|
Double stitching throughout the unit with triple stitching and quadruple stitching in key areas inside the base of the unit
|
Heavy woven netting of synthetic nylon
| 
Safety Ramp standard on every unit
Our ramp is inclined to make it easy to enter and exit, but also to discourage children from playing on the step.
|
Nylon webbing reinforces key stress points.
| 
Nylon webbing used to reinforce seams between walls and base
|
Business card holder
| 
Safety Warning sign
|
Personalized banner with up to 3 lines of information |
|
Airstream or Tool King blowers
|
Corner vents are finished and reinforced with vinyl |
Two blower tubes on every unit for fast deflation and ease of setup
Optional Features
Base Zipper
We can add a 3' long zipper to the base of your unit. The zipper has a hook-and-loop(velcro) tape vinyl flap covering it for security and allowing it to blend into the base. Unzipping this opening allows your unit to deflate faster and also allows you to crawl into the base (while inflated) to dry out the base or repair damages. We highly recommend adding a zipper to the base of your unit.
Backflow Preventers
We can add backflow preventers inside the inflation tubes that slow down the passage of air out of the tubes. This is helpful in keeping the unit inflated in the event of a power outage to the blower. Please note that inflatable units are designed to lose air- that's what makes them bouncy! The backflow preventers merely slow the loss of air. If you have backflow preventers installed, you must also have a zipper installed in order to deflate your unit properly.
|
